West Control Solutions Pro-16 - Manual (Page 86)

Safety notes
9499-040-093811 / 59537-1 86 Page 86 of 88 9499-040-0 Pro-16
13.1 Resetting to factory setting
In case of faultyconfiguration, KS20-1 can be reset to the default condition.
1
ÈÌ
+ Power on
2
И
3
Щ
4
1 For this, the operator must keep the UP and DOWN keys pressed during
power-on.
2 Then, press UP key to select YES.
3 Confirm factory resetting with Enter and the copy procedure is started
(display COPY).
4 Afterwards the device restarts.
In all other cases, no reset will occur (timeout).
g
If one of the operating levels was blocked and the safety lock is open, reset to
factory setting is not possible.
g
If a pass number was defined (via BlueControl® ) and the safety lock is open, but no
operating level was blocked, enter the correct pass number when prompted in 3. A
wrong pass number aborts the reset action.
g
The copy procedure ( COPY) can take some seconds. Now, the transmitter is in
normal operation.