West Control Solutions TB 45 Temperature Limiter - Manual (Page 38)

Name Value range Description
Dis1 Selection which value should be displayed on display line 1
0 Display value
1 Limit value LC
T.Dis2 Settings for text in display 2 (max. 5 digits)
(only visible with BlueControl
Ò
!)
Linearization Lin
Only visible via BlueControl ® !
Name Value range Description
U.LinT Temperature unit of the linearization table
0 without unit
1 in Celsius
2 in Fahrenheit
3 in Kelvin
In.1 … In.16 OFF (ab In.3) -1999...9999 Input 1 … input 16
Ou.1 … Ou.16 -999.0 … 9999 Output 1 … output 16
g
Value U.LinT defines the unit of input values specified for linearization of temperature values. Value entry
in Celsius despite display of the measured value in Fahrenheit is possible.
w
Specify the input signals mV, V, mA, % or Ohm dependent on input type.
w
For special thermocouples (S.tYP = 18), specify the input values in
μV and the output values in the
temperature unit adjusted in U.LinT.
w
For special resistance thermometer (KTY 11-6) (S.tYP = 23), specify the input values in Ohm and
the output value in the temperature unit adjusted in U.LinT .
g
Resetting to factory setting (default)
r chapter 2.4, 6.8 (page 8)
Configuration level
38 Configuration TB 45