2general – West Control Solutions KS 800 Operating Instructions User Manual
Page 6
Multi-Temperature-Controller KS 800
2
General
KS 800 is a microcomputer-based multi-loop temperature controller. Functions "set-point lowering"
and "heating/cooling with four alarms" make it ideally suited for temperature control of plastics 20
processing machinery, moulds, packaging machinery, tempering units and similar thermal proces-
ses. Furthermore, with high-power heating elements (e.g. in hot runner moulds), the selectable
functions "start-up circuit" and "output hold" in case of sensor break ensure increased element life
and prevent interruptions during production. The self-tuning feature guarantees very short start-up
times.
2.1
Versions
These operating notes are valid for the three versions, which are only different in the communica-
tion interface:
Multiple temperature controller with RS485 / RS422 interface and ISO 1745 protocol.
9407 480 00001 KS 800-RS:
Without analog outputs
9407 480 00101 KS 800-RS:
With analog outputs, standard current signal 0/4...20mA
9407 480 00201 KS 800-RS:
With analog outputs, standard voltage signal 0...10V
9407 480 00301 KS 800-RS:
With 10V= constant-voltage
Multiple temperature controller with Profibus DP interface and Profibus DP protocol.
9407 480 30001 KS 800-DP:
Without analog outputs
9407 480 30101 KS 800-DP:
With analog outputs, standard current signal 0/4...20mA
9407 480 30201 KS 800-DP:
With analog outputs, standard voltage signal 0...10V
9407 480 30301 KS 800-DP:
With 10V= constant-voltage
Multiple temperature controller with CANbus interface and CANopen protocol.
9407 480 60001 KS 800-CAN:
Without analog outputs
9407 480 60101 KS 800-CAN:
With analog outputs, standard current signal 0/4...20mA
9407 480 60201 KS 800-CAN:
With analog outputs, standard voltage signal 0...10V
9407 480 60301 KS 800-CAN:
With 10V= constant-voltage
Multiple temperature controller with CANbus interface and Device-Net protocol.
9407 480 70001 KS 800-DN:
Without analog outputs
9407 480 70101 KS 800-DN:
With analog outputs, standard current signal 0/4...20mA
9407 480 70201 KS 800-DN:
With analog outputs, standard voltage signal 0...10V
9407 480 70301 KS 800-DN:
With 10V= constant-voltage
The differences between the KS 800 versions are only in the field bus / serial interface.
6
9499 040 49111