Badger Meter GALAXY - Manual (Page 12)

GALAXY® Gateway Receiver 3.0 Fixed Network
Figure 10: Cable Strain Relief
8 . Hand-tighten the cable gland dome nut on the outside of the receiver by turning it clockwise . The dome nut seal
must be in firm contact with the power / communication cable outer jacket .
Figure 11: Cable Gland Dome Nut
9 . Replace the cover by aligning the receiver board with the guide rails inside the enclosure . Verify proper O-ring
seating before tightening the screws .
Figure 12: Guide Rails and O-Ring
Dome
Nut
Guide Rail
Page 12 January 2013