Badger Meter GALAXY - Manual (Page 16)

GALAXY® Gateway Receiver 3.0 Fixed Network
The Badger Meter GALAXY Gateway Wi-Fi receiver requires 12 – 18V DC power source capable of delivering 200 mA
continuously and up to 360 mA peak at 12V DC . If connecting to a voltage supply of less than 15V DC the power /
communication cable length is limited to 100 feet .
External Power Source Connections
Wire Color External DC Power Source
Drain (no insulation) Negative (–)
Black Negative (–)
Brown Not Used/Cut off at outer Jacket
Red Positive (+)
Light Blue Not Used/Cut off a outer Jacket
NOTE: N Unused wires should be cut off at the outer jacket .
MAINTENANCE
Please visually inspected the Gateway Receiver 3 .0 unit, its cabling and mounting hardware along with any additional
installation hardware on an annual basis to be sure that the unit remains in the condition of its original installation .
FCC REQUIREMENTS
The Badger Meter GALAXY Gateway Receiver 3 .0 complies with Part 90 of the Federal Communications Commission Rules . An
FCC license is required for operation of the GALAXY system .
Page 16 January 2013