Badger Meter GALAXY User Manual
Page 13
Advertising
Installation & Operation Manual
10 . Attach the connectors from each antenna cable to the receiver as shown . Tighten each connector until firmly seated .
Do not overtighten .
Figure 13: Antenna Connections to Receiver
11 . Ensure the coax connector attached to the bottom of each antenna is firmly seated and connected . Torque
the connector finger tight, then tighten an additional 1/8 turn .
Figure 14: Coaxial Cable Attachment to Antenna Base
Backhaul Antenna
Receiver Antenna
Power / Communications
Cable
Antenna
Connector
Page 13
January 2013
Advertising