Badger Meter ORION Classic (CE) - Manual (Page 10)

To set the individual settings for your PC, go to the drop down menus at the top of the
screen and choose Options / Settings. You’ll see this screen.
You can choose the ports for both the IR head and the Repeater cable by clicking on the
down arrow and choosing the port. You can also choose the receiving mode for the
Repeater by clicking on the Change Prog. Mode button. Choosing narrow band will
focus the Repeater on the narrow band Badger
®
ORION
®
transmitters. Choosing
Frequency Hopping will focus the Repeater on the newer ORION transmitters using the
Frequency Hopping Spread Spectrum technology, as well as the narrow band
transmitters.
10