Badger Meter ORION Classic (CE) - Manual (Page 11)

If you decide to change the font, you’ll see this screen.
Choose the font, the style, and the size and click OK. If you wish to discard your
changes, click Cancel.
READ REPEATER
The Read Repeater button is the first function you perform when using the RP software.
It initiates communication with the Repeater itself, fetches the list of Badger
®
ORION
®
transmitters in the Repeater memory, and displays them in a list on the right side of the
screen.
Once the COM Port is set and the cable connects the PC to the Repeater, click the Read
Repeater button. The PC will communicate with the Repeater, fetch the list of
transmitters from the Repeater, and display them on the list.
If any communications errors occur, you’ll see a message like this.
11