Badger Meter ORION Classic (CE) - Manual (Page 12)

Check the cable and the COM port setting. Once you’ve made sure that all is correct,
you can click the Read Repeater button again. If the problem persists, please refer to the
last section of this manual: Troubleshooting the Badger
®
ORION
®
Repeater.
THE TRANSMITTER INFORMATION ON THE READ
SCREEN
Besides the serial number of the transmitter being repeated, you will also see this
information.
• Transmitter serial number being repeated
• The MT (Meter Type) received from the transmitter:
o RTR
®
o ADE ®
o Gas
• The last reading received from the transmitter
o L – Leak
o T – Tamper
o R – Reverse Flow
o S – Stopped Meter
• The status received from the transmitter
• The number of times the Repeater missed a meter reading from this transmitter
(note that the Repeater listens for transmissions once per hour).
12