Badger Meter ORION Classic (CE) - Manual (Page 15)

CLEARING ALL THE SERIAL NUMBERS FROM
THE LIST
If you wish to clear all serial numbers from the list, click on the Clear SN List button.
The screen will show the main menu with no serial numbers on the list.
UPDATING THE REPEATER WITH THE
DISPLAYED LIST
Once the list is updated to show the serial numbers you want the Repeater to repeat,
connect the communications cable to the Repeater and PC and click on the Program
Repeater button. The RP Software will send the displayed list to the Repeater.
USING THE REPEATER TO LISTEN TO ALL
TRANSMITTERS IN RANGE
If you wish to see a list of the transmitters that the Repeater is receiving, connect the
Repeater to the PC via the cable and click on the Listen button. You’ll see this screen.
15