Badger Meter ORION Classic (CE) - Manual (Page 13)

ADDING A SERIAL NUMBER TO THE LIST
To add a serial number to the Repeater, connect the PC to the Repeater and click on the
Read Repeater button. When the list of serial numbers from the Repeater is displayed,
click on an open spot on the list and click on the Edit Selected SN button. You’ll see this
screen.
If you wish, you can enter the serial number of the transmitter by typing it in on the
computer’s keyboard. Also, if you click on the Keypad button, a numeric keypad will be
displayed that you can use to enter the serial number. Finally, if you wish to read the
serial number from the transmitter via the IR head, connect the head to the computer and
click on the IR button.
Once the serial number is entered, click the OK button. The screen will show the main
menu with the serial number added to the list. The rest of the data for the transmitter will
be blank.
13