Badger Meter ReadCenter - Manual (Page 100)

Unload Collectors – Radix
ReadCenter Analytics
Route Reading> Unload Collectors
ReadCenter Analytics Mobile
Meter Reading Cycle> Unload Collectors
Step 1 Select Handheld Reader, check the Radix box, and enter the File Location where information from the
Radix will be sent You may also click Browse to look for the File Location
OTE: N Do not check "With Work Items "
Step 2 Click Unload Collector to activate the Radix File Transfer process When the process completes and the unload
file is ready for the next step, a message is displayed in red as shown here
Step 3 Click View Unloaded Readings to verify that the account information was retrieved from the reading device
Information at this point is in a raw data format from the collector Once updated in Step 4, the billing resolution
and test circle code will be applied
Step 4 Click Update Accounts to store the current reading data in ReadCenter Analytics or Analytics Mobile and apply the
billing resolution and test circle code
ReadCenter® Analytics & Analytics Mobile
Page 100 June 2014