Badger Meter ReadCenter - Manual (Page 74)

ORION SE Work Items Tab
The ORION SE Work Items tab is used to set optional tasks for collecting additional data for a group of selected ORION SE
endpoints When a work item is requested on the ORION SE Work Items tab, the work item is performed once and then the
flag is cleared A work item selected on this screen must be requested each time it needs to be performed
Extended Status Collects the full status of the endpoint with additional data such as the meter type, size and unit of
measure
Firmware Version Collects the firmware version of the selected ORION SE endpoints
Coordinates
Collects the latitude and longitude that was programmed into the endpoint
OTE: N Work items for ORION ME endpoints can be requested on the Load Collectors screen Refer to "Load Collectors"
on page 19 for more information.
Requesting ORION SE Work Items
1 Check the box to choose any or all Work Item(s) you want
2 Select By Group, By Route or By Account
3 Click View Selected Accounts to make sure you have the correct accounts selected
4 Click Apply ORION SE Work Items
5 Confirm the Work Item(s) by selecting Yes in the window that displays
Result: A confirmation window displays and "Operation Complete" displays in the bottom tool bar to show how many
endpoint work items are set.
6 Click Close to exit the Endpoint Settings screen
ReadCenter® Analytics & Analytics Mobile
Page 74 June 2014