Badger Meter ReadCenter - Manual (Page 54)

Meter
The Meter tab displays details about
the meter, such as the Meter Serial # and
Meter Location
Field Name Type Size Description
Meter Code Numeric —
1 RTR or Unspecified 6 Gas Remote
2 ENC 7 Mag
3 Gas Integral 8 C700D
4 ELCD 9 HRE
5 Permalog
OTE: N Currently field is for Badger Meter internal use only
Meter Type Water
Gas RT
Gas ORION
Electric
Other
— Type of service being read If not specified, the default is water
Meter Serial # Alphanumeric 50 Identification number of the meter This number is used by readers for verification when
manually entering readings into a collection device
Meter Install Date Date — Optional—date the meter was installed
Meter Location Alphanumeric 50 Optional—details to help locate the meter
Meter Sub-Group Account Table 50 Optional—for future development to identify a group of meters that are supplied by a
main meter
Meter Instruction Account Table 50 Optional—table entry assigned used to associate information about the meter
Read Value Numeric — The actual (raw) reading unloaded from the collection device (see Note below)
Last Received Date — The date the account record was read from a billing input file
Read Value Note:
• The meter reading formatted for billing is shown on the From Reader tab in the Present Read field
• Radio and touch reads may be adjusted based on a multiplier that relates to the Read Resolution shown on the
Registration tab The multiplier varies according to the size of the meter Radio and touch reads may also be
adjusted by the reading resolution defined in configuration settings discussed during initial training Refer to "Billing
Interface Codes" on page 94 for more information
ReadCenter® Analytics & Analytics Mobile
Page 54 June 2014