Badger Meter Cox Precision Turbine Meters - Manual (Page 9)

REASSEMBLY
Reassembly is the reverse of disassembly except for the following:
• On Precision Turbine Flow Meters where shaft bearings are provided with a
retainer, always install with the retainer flange facing upstream .
• Inspect rotor for markings as shown in Figure 4 to indicate flow direction before
assembly .
• Flow meters having broached slots in the body for flow straightener vanes
should be carefully assembled .
• Align straightener vanes with the slots and push gently until the assembly
is seated .
Figure 4: Scribed lines
User Manual
Page 9 May 2014