Analog maximum flow rate – Badger Meter Model IOG User Manual
Page 17
Advertising
Analog Maximum Flow Rate
(For model ILR 730 only)
Indicated by an “H” on the left-hand side of the display, this screen allows the setting of the flow rate that corresponds to the
20 mA output:
OTEE:
N
The maximum flow rate value must be greater than the minimum flow rate value
•
Minimum 0 0 lpm/gpm
•
Maximum 100 0 lpm/gpm
•
Default 30 lpm/8 gpm
To advance to the next programming screen, hold the TOTAL button
OTEE:
N
Error checking will not allow the user to advance to the next screen
PER MIN
Figure 12E: Analog Maximum Flow Rate Screen
User Manual
Page 17
May 2013
Advertising