Pulse transmitter (model ilr 740), Transmitter wiring – Badger Meter Model IOG User Manual
Page 21
Advertising
Pulse Transmitter (Model ILR 740)
Figure 16E: ILR 740 Pulse Transmitter
OrientationE: The register must be mounted as shown above (mounted in-line with the flow) with the flow going left to right
or right to left as shown on this page The transmitter will not function if mounted perpendicular to the flow
Transmitter Wiring
Reed switch outputs: Green and white
Ratings:
Maximum PowerE:
10 watts (not to exceed 10 W)
Maximum VoltageE:
200V DC / peak AC
Maximum CurrentE:
0 5A DC / peak AC
Outputs: Raw reed switch output with no signal conditioning
ILR 740
GREEN
WHITE
Figure 17E: ILR 740 Wiring
User Manual
Page 21
May 2013
Advertising