Badger Meter Water Conditioning - Manual (Page 5)

ABOUT THIS MANUAL
This manual contains information concerning the installation, operation and maintenance of the Badge Meter® Model PRC-20
with AR/t or RTR® Water Conditioning Control System To ensure proper performance of the system, the instructions given in
this manual should be thoroughly understood and followed
SAFETY INFORMATION
The installation of the Model PRC-20 must comply with all applicable federal, state, and local rules, regulations, and codes
Failure to read and follow these instructions can lead to misapplication or misuse of the Model PRC-20, resulting in personal
injury and damage to equipment
UNPACKING & INSPECTION
Upon opening the shipping container, visually inspect the product and applicable accessories for any physical damage such
as scratches, loose or broken parts, or any other sign of damage that may have occurred during shipment
NOTE: N If damage is found, request an inspection by the carrier’s agent within 48 hours of delivery and file a claim with the
carrier A claim for equipment damage in transit is the sole responsibility of the purchaser
INSTALLATION
The control system consists of a Badger Meter Disc or Turbo meter with the AR/t or RTR pulse transmitter and the PRC-20
Conditioning Controller Normally, the transmitter will be mounted on the meter It does not require any additional mounting
procedure All transmitters use a simple bayonet mount and a seal screw to attach to the meter
NOTE: N Always be sure to match the transmitter to the proper meter A red dot on the AR/t transmitter dial indicates the
meter model and size for which the transmitter is intended The RTR dial face has the model designation of the
appropriate meter
Figure 1: Control system components
User Manual
Page 5 April 2013