NORD Drivesystems BU2100 - Manual (Page 26)

EtherNet/IP Bus module – Supplementary manual options for NORD - Frequency Inverters
26 BU 2100 GB-2213
P173
Module Status
(Module status)
SK EB…
SK TU3- …
SK xU4- …
16 bit
0 ... 0xFFFF Operating status of the module.
Bit 0 = Module ready for operation* Bit 1 = Cyclic communication*
Bit 2 = Timeout by Ethernet bus* Bit 3 = Timeout (P151/P513)*
Bit 4 = No communication with ASIC* Bit 5 = General configuration error*
Bit 6 = System bus "BUS Warning"** Bit 7 = System bus "BUS OFF"**
Bit 8 = FI 1 status Bit 9 = FI 1 status
Bit 10 = FI 2 status** Bit 11 = FI 2 status**
Bit 12 = FI 3 status** Bit 13 = FI 3 status**
Bit 14 = FI 4 status** Bit 15 = FI 4 status**
* Except for ...IOE modules
** Except for SK TU3 versions
THe status of the frequency inverter is determined from a High bit and a Low bit: e.g. FI
1: High bit: Bit 9; low Bit: Bit 8
High Bit Low Bit Meaning
0 0 FI is offline
0 1 FI is not supported
1 0 FI is online
1 1 Bus error (PDO or SDO monitoring)
P174
Status of digital input
(Status of the digital inputs)
SK EB…
SK xU4- …
8 bit
0 ... 0xFF Image of the switching status of the digital inputs of the module.
Bit 0 = Digital input 1 Bit 1 = Digital input 2
Bit 2 = Digital input 3* Bit 3 = Digital input 4*
Bit 4 = Digital input 5** Bit 5 = Digital input 6**
Bit 6 = Digital input 7** Bit 7 = Digital input 8**
* Except for ... CU4- modules
** Only SK TU4-ECT, SK TU4-EIP, SK TU4-PNT and SK TU4-POL
P175
Relay Status
(Switching status of relay)
SK EB…
SK TU4- …
8 bit
0 ... 3 Image of the switching status of the relay outputs of the module.
Bit 0 = Relay 1 Bit 1 = Relay 2