NORD Drivesystems MI0300 - Manual (Page 26)

Decentralised drive technology - from SK 300E to SK 200E
26 Migration Guide-GB-11.10.2012
Profibus DP SK TU2-PBR-24V-(C) or SK TU4-PBR-(C)
SK 300E SK 2xxE
SK TU2-PBR-24V(-C) SK TU4-PBR(-C) SK TI4-TU-BUS(-C)
Information bout the other two technology options SK TU2- PBR-(C) and SK TU2-KL-…-(C) for the SK
300E can be found in manual BU 0020. Only the 24V version of the SK 300E is described here.
24V dc connection assignments
M8 pin Signal
1 24V DC
±25%
3 GND
4 n.c.
An M12 flanged plug connector type SK TIE4-M12-
POW / part number 275274507 is available for
connecting the 24V supply voltage for the SK TU4-
PBR-(C) technology option. See below for the pin
assignment.
Fig. 18: M8 socket pin assignment for the 24V supply for SK TU2-PBR-24V-(C)
Standard assignment
M12 pin Signal
1 + 5V
2 A Data
3 GND
4 B Data
5 n. c.
The M12 flanged socket and plug connector type type
SK TIE4-M12-PBR / part number 275274500 are
available for connection the DP Bus cable. See below
for the pin assignment.
Fig. 19: M12 socket and plug connector pin assignment for the Profibus DP connection to SK TUx-PBR-
To be connected to the terminals
of the control terminal bar of the
technology option
SK TU4-PBR(-C), refer to Table
14: Overview of control terminals
Fig. 20: M12 flanged connector SK TIE4-M12-PBR for SK 2xxE