Additional information and documents, Manuals, Installation and conversion instructions – NORD Drivesystems MI0300 User Manual
Page 33: Data sheets, Flyers, Nordcon pc software, Nord software files for optional modules, Information
Additional information and documents
33
5. Additional information and documents
In addition to this document, data sheets, manuals, mounting instructions and flyers are available for
the products described.
Manuals
Basic information about the frequency inverters can be found in the relevant manuals for the
frequency inverter series (e.g. BU 0200 for SK 2xxE).
Further information concerning special technology options (e.g. the field bus module) is included in the
relevant supplementary operating instructions (e.g. BU 0220 for Profibus DP). Information about the
control and parameterisation units can be found in manual BU0040.
Installation and conversion instructions
Installation instructions are available for the installation of the SK 2xxE frequency inverter. This is
available on request from your Getriebebau NORD contact partner.
Supplementary conversion instructions, BU 0320 are available in Internet for the conversion of
NORDAC trio TR frequency inverters to the SK 2xxE series.
Data sheets
Data sheets for various additional components (e.g. mains filters) can be obtained from
Flyers
The product flyer for decentralised drive technology, F 3020 provides an overview of the technical
data, features and accessories for the SK 2xxE series.
In addition, special flyers are available for pump and fan applications (S 3021) and applications for
conveyor technology (S 3022).
NORDCON PC software
The NORDCON PC software can be used for the control and parameterisation of NORD frequency
inverters. SK 2xxE frequency inverters and the associated technology options are currently
implemented as of version 02.01.02.02.
NORD software files for optional modules
The appropriate software files (GSD, EDS) are available for download in Internet for the field bus
options which are available for the relevant field bus applications. The software files for the SK 2xxE
frequency inverter series are different to those for the SK 300E.
The following points must be noted for planning the software for automation systems (SPS, CANopen
Master, etc.) when changing to the technology options for the SK 2xxE:
· Device master files (GSD and EDS) for SK TU4-xxx-(C) technology options
· PPO types 2 and 4: the setpoint and actual values 2 and 3 are transposed in the process data
· Changes for the parameter values in the parameter channel (array parameters, parameter
structure, etc.)
Information
The latest versions of the documentation (manuals, flyers, NORDCON software etc.) can be downloaded in
Internet from the NORD homepage (www.nord.com).