NORD Drivesystems MI0300 - Manual (Page 4)

Decentralised drive technology - from SK 300E to SK 200E
4 Migration Guide-GB-11.10.2012
SK 300E
Components
SK 200E
Designation Illustration Illustration Designation
M12 System connector System connectors SK TU4-xxx-M12
MA H10E Motor plug connector SK TIE4-HAN10E
Table 1: Overview of components
1.2 Overview of frequency inverters
The assignment of the inverter versions according to the supply voltage and the rated power of the
devices is summarised below. A distinction is made between the frequency inverter and the
connection unit. The details for the IP 66 versions are shown in brackets.
SK 300E
Mains type
Power level
SK 2xxE
Designation Designation
SK 300E-xxx-323-B-(C)
1 phase~ 230V / 240V
370W … 550W / ½ … ¾ hp
SK 200E-xxx-123-A-(C)
SK 300E-xxx-323-B-(C)
1 phase~ 230V / 240V
750W … 1.1kW / 1 … 1 ½ hp
SK 205E-xxx-123-A-(C)
1
Attention: different frequency
inverter version!
SK 300E-xxx-323-B-(C)
3 phase~ 230V / 240V
370W … 550W / ½ … ¾ hp
SK 200E-xxx-323-A-(C)
SK 300E-xxx-340-B-(C)
3 phase~ 400V / 480V
550W … 4.0 kW / ¾… 5 hp
SK 200E-xxx-340-A-(C)
Table 2: Overview of frequency inverters - Power levels
SK 300E
Information
SK 2xxE
Designation
Note
Designation
Note
SK TI0/1-230-(C)
a
SK TI0/1-400-(C)
b
For motor mounting and wall mounting.
Provides space for installation of the
Customer Unit.
SK TI4-x-2xx-x-(C)
The connection units are directly
assigned to the frequency inverter
versions, mains tapes and power
levels.
SK TI0/2-230-(C)
a
SK TI0/2-400-(C) b
In addition:
Mounting of system plug connectors
(motor / mains connection).
a for all 230V inverters; b for all 400V inverters
Table 3: Overview of connection units
1
higher powers are available (refer to note / Section 2.1.2)