4 optional components – Sterlco GH-M Series Extrusion Control Weigh Hoppers User Manual
Page 22
Advertising
![background image](/manuals/373415/22/background.png)
Chapter 2: Functional Description
22 of 60
2-4 Optional
Components
The following is a list of options, which your rate monitor may have been equipped with:
Ethernet Module
In lieu of an inductive proximity switch, the extruder’s RPM may be written through
communications. To accomplish this, an Ethernet module and connecting cable (to PLC) is
offered as an option.
Advertising
This manual is related to the following products: