Sterlco GH-M Series Extrusion Control Weigh Hoppers - Manual (Page 57)

Chapter 7: Appendix 57 of 60
6. extruder_no_rpm_detected_alarm,b28:0/5
7. extruder_no_flow_detected_alarm,b28:0/6
8. hauloff_drive_failure_alarm,b28:0/7
9. loadcell_over_max_alarm,b28:0/8
10. reload_too_long_alarm,b28:0/9
11. gravimetrics_%_too_low_alarm,b28:0/10
12. plc_battery_low,s:5/11
13. plc_memory_module_loaded,s:5/8 (this alarm only happens while upgrading the GH Hopper’s
software)