Sterlco GH-M Series Extrusion Control Weigh Hoppers - Manual (Page 54)

Chapter 7: Appendix 54 of 60
Figure 72: Typical Analog Options
Analog options screen
This screen is not used with the GH-M Rate Monitor. Adjust appropriately for GH Full
Control units and GH-F units.
Figure 73: Typical Diagnostics Screen
Diagnostics Screen
Use this screen for trouble shooting and making tuning adjustments. Typically make an
adjustment, reset high/lows, and then weight for some time to observe this page.
Go back to
Engineering
Only Directory