Brother Innov-is V5 - Manual (Page 199)

CONFIRMING THE PATTERN POSITION
Em
br
oide
ry
Embroidering E-19
E
1 The pattern is normally positioned in the center of the embroidery frame. If the pattern needs to be
repositioned for better placement on the garment, you can check the layout before starting embroidery.
Checking the Pattern Position
The embroidery frame moves and shows the
pattern position. Watch the frame closely to make
sure the pattern will be sewn in the right place.
a
Press .
→ The following screen is displayed.
b
From , press the key for the position
that you want to check.
a Selected position
→ The needle will move to the selected position on the
pattern.
c
Press .
CONFIRMING THE PATTERN POSITION
Memo
• To see the entire embroidering area, press
. The embroidery frame moves and
shows the embroidery area.
CAUTION
• Make sure the needle is up when the
embroidery frame is moving. If the needle is
down, it could break and result in injury.
a