Brother Innov-is V5 - Manual (Page 233)

EMBROIDERY APPLICATIONS
Em
br
oide
ry
Embroidering E-53
E
1
f
Reattach the embroidery frame to the
embroidery unit, and embroider the satin
stitch pattern to create an appliqué.
Sewing Split Embroidery Patterns
Split embroidery patterns created with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT can be sewn.
With split embroidery patterns, embroidery
designs larger than the embroidery hoop are
divided into multiple sections, which combine to
create a single pattern after each section is sewn.
For details on creating split embroidery patterns
and for more detailed sewing instructions, refer to
the Instruction manual included with PE-DESIGN
Ver.7 or later, or PE-DESIGN NEXT.
The following procedure describes how to read
the split embroidery pattern shown below from
USB media and embroider it.
a
Connect to the machine the media
containing the created split embroidery
pattern, and then select the split
embroidery pattern to be embroidered.
* For details on recalling patterns, refer to “Selecting
Patterns from Embroidery Cards” on page E-7,
“Recalling from USB Media” on page E-49, or
“Recalling from the Computer” on page E-50.
→ A screen appears so that a section of the split
embroidery pattern can be selected.
b
Select section to be embroidered.
* Select the sections in alphabetical order.
* A maximum of 12 sections can be displayed in one
page. If there are 13 or more sections in the pattern,
press or to display the previous or next
page.