Configuring server management components, Installing and removing the i/o expansion module – Acer Altos R920 Series User Manual
Page 101
Advertising
83
Configuring server management
components
Altos R920 system provides an upgrade path to advanced server
management capabilities through installation of the following
components.
•
I/O expansion module
•
ARMC/3 R2 module
Installing and removing the I/O expansion module
The optional I/O expansion module is a vertical riser with a dedicated
management Ethernet port, and additional dual-gigabit Ethernet
ports.
To install the I/O expansion module:
1
Perform the pre-installation instructions described on page 39.
2
Rotate the retention latch on the rear of the card slot upward (A).
3
Pull up the slot cover (B).
4
Remove the board from its protective packaging.
5
Align the board in the empty slot (C).
Advertising