Changing a system password, Removing an administrator password – Acer Altos R920 Series User Manual
Page 140
4 System BIOS
122
Changing a system password
1
Use the up/down keys to highlight either change password
parameters (Set Administrator Password or Set User Password)
then press Enter.
2
Type the original password then press Enter.
3
Type a new password then press Enter.
4
Retype the password to verify the first entry then press Enter
again.
Removing an administrator password
Note: Removing the administrator password also removes the
user password.
1
Use the up/down keys to highlight the Set Administrator Password
parameter then press Enter.
2
Enter the current password then press Enter.
3
Press Enter twice without entering anything in the new and
confirm password fields.
After doing this, the system automatically sets the User password
parameter to Not Installed.