Acer Altos R920 Series User Manual
Page 75
Advertising
![background image](/manuals/37645/75/background.png)
57
To remove a power supply:
Caution: Power supply hot-swap operations should be performed
only if a failure occurs in the power supply.
1
Observe the ESD precautions described on page 39.
2
Remove the AC power cord from the power supply.
3
Press down on the latch to release the power supply handle (A).
4
Open the handle on the power supply (B).
5
Pull the power supply from the chassis and set it on a clean, static-
free surface (C).
A
B
C
Advertising