Acer Altos R920 Series User Manual
Page 109
Advertising
91
7
Attach the SAS expander cables to the SAS connector A (A) and
the SAS connector B (B) on the adapter.
8
Attach the SES cable to the SES connector on the SAS module (C).
9
Observe the post-installation instructions described on page 40.
To remove the SAS module:
1
Perform the pre-installation instructions described on page 39.
2
Remove the processor air baffle. Perform instructions described in
“To remove the processor air baffle” section on page 45.
A
B
C
Advertising