Acer Altos R920 Series User Manual
Page 79
Advertising
![background image](/manuals/37645/79/background.png)
61
Note: Press the attention button again within five seconds to
abort the hot-plug operation.
3
Make sure that the power LED on the rear of the PCI slot is turned
off before disconnecting any cables attached to the card.
4
Open the yellow caution plate (A).
5
Rotate the slot retention latch on the rear of the card slot upward
(B).
6
Release the vertical edge of the card and pull it away from the
chassis (C).
7
Store the card in an antistatic protective wrapper.
8
If installing a new PCI card, see “To install a new PCI hot-plug PCI
card” section.
9
Observe the post-installation instructions described on page 40.
PCI C
aution Plat
e
A
B
C
PCI A
dd-in C
ard
Advertising