Acer Altos R920 Series - Manual (Page 78)

3 System upgrade 60
5 Open the yellow caution plate (A).
6 Rotate the slot retention latch on the rear of the card slot upward
(B).
7 Release the vertical edge of the card and pull it away from the
chassis (C).
8 Store the card in an antistatic protective wrapper.
9 If installing a new PCI card, see “To install a new PCI hot-plug PCI
card” section.
10 Observe the post-installation instructions described on page 40.
To remove a hot-plug PCI card with hardware interface:
1 Perform the pre-installation instructions described on page 39.
2 Press the attention button for this slot.
PCI C
aution Plat
e A
B
C
PCI A
dd-in C
ard