Brother SE-270D - Manual (Page 123)

Attaching the embroidery foot 117
4
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Removing the embroidery foot
a
Press (Needle position button) once or
twice to raise the needle.
X The needle is raised.
b
Turn off the sewing machine.
c
Raise the presser foot lever.
a Presser foot lever
X The presser foot is raised.
d
Loosen the presser foot holder screw and
remove the embroidery foot "Q".
Turn the screwdriver toward the back.
e
Attach the presser foot holder.
• For details, refer to "Attaching the presser foot
holder" (page 40).
1
1