Brother SE-270D - Manual (Page 19)

LCD (liquid crystal display) operation 13
1
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Changing the Machine Settings
Various sewing machine operations and sewing settings can be changed.
The stitch or machine attributes that can be set are listed below.
a
Turn on the sewing machine.
X The LCD comes on.
b
Press (Settings key) on the display panel.
X The settings screen appears.
Attribute Icon Details Settings
Thread color/
needle count You can switch among thread color/thread
number/needle count when embroidering.
Thread color/Embroidery thread
number/Country Embroidery thread
number/Needle count/Time to
Embroider (after
is pressed)
Needle
position Specifies where the needle is positioned
when the sewing machine is stopped.
Down Up
Twin needle
sewing
Specifies the twin needle. Normal needle Twin needle
Thread color
index
When embroidery data containing custom
thread colors specified with the PE-DESIGN
Ver.5.0 is saved on a blank card, the stored
custom thread colors are displayed on the
machine, if "ON" is selected for this setting.
Automatic
thread cutting
for embroidery
Press this key to use the automatic thread
cutting function when embroidering.
Stitch width
control Allows the stitch width to be adjusted with
the sewing speed controller.
Buzzer
Specifies whether or not a beep is sounded
with each operation (page 156).
Opening
screen
Sets whether or not to display the opening
screen when the power is turned on.
(There are models where this cannot be
changed.)
Language
Allows the language used in the screens to
be changed.
English, French, German, Dutch,
Spanish, Italian, Danish,
Norwegian, Finnish, Swedish,
Portuguese, Russian, Japanese,
Korean or others
LCD brightness Adjusts the brightness of the LCD. Lighter Darker