Brother SE-270D - Manual (Page 61)

2
Adjusting the Stitch Width and Length 55
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Adjusting the stitch length
The stitch length can be adjusted on the LCD.
a
Turn on the sewing machine.
X The LCD comes on.
b
Select a stitch.
X A screen containing settings for the selected
stitch appears.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 45).
• Immediately after the stitch is selected, the
standard settings (highlighted) appear.
c
To make the stitch length shorter, press .
To make the stitch length longer, press .
X The stitch length is changed.
• If the setting is changed, the highlighted
value is erased.
Memo
z To reset the stitch length to its standard
setting, select the same stitch again or
change the setting to the highlighted value.
z means the setting cannot be adjusted.
CAUTION
● If the stitches are bunched together,
increase the stitch length. Continuing to
sew with the stitches bunched together
may result in the needle bending or
breaking.