Brother MFC-J410W - Manual (Page 28)

Configuring your machine for a wireless network
21
3
Step by step chart for wireless network configuration
3
For Infrastructure mode
3
a
Confirm your network environment. (See page 23.)
b Confirm your wireless network setup method. (See page 24.)
c Configure your machine for a wireless network. (See page 27.)
Wireless configuration and installing drivers and software have been completed.
 Infrastructure mode
Connected to a computer with an access point
or
 Ad-hoc mode See page 22.
Connected to a wireless capable computer without
an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
WPS/AOSS control
panel menu
Using the PIN
Method of Wi-Fi
Protected Setup
Using the Brother
installer application
Temporarily using a
USB cable or
network cable
Using the
WPS/AOSS control
panel menu
See page 27. See page 32. See page 34. See page 37. See page 48.
Installing drivers and software (See the Quick Setup Guide.)