Flow of intelligent function setting, Camera position settings – Canon VB-S800D User Manual

Page 101

Advertising
background image

Intelligent Function Setting Tool

101

5

Adm

in T
ools

If camera control privileges are not obtained, this

function is grayed out.

(10)[Detection Settings]

Show the [Detection Settings] dialog box (p. 108).

This dialog box allows you to reduce the effects of

lighting changes.

(11)[Lock camera position] checkbox

Select this checkbox to move the camera position to a

preset position selected from the preset selection box

and lock it there. Lock the camera position when

specifying detection settings to obtain a correct

detection result.

If camera control privileges are not obtained or if

preset positions are not set, this function is grayed

out.

(12)Camera position selection box

Select the camera position from the view restriction

presets or the home position. Use the Preset Setting

Tool to set presets or the home position (p. 90).

If camera control privileges are not obtained, the

[Lock camera position] checkbox is not selected, or if

the preset position is not set within the view restriction

area, this function is grayed out.

(13)[Detection Setting List]

A list with the specified detection settings is shown.

(14)[Add]

The [New Detection Settings] dialog box is shown and

detection settings can be added.

(15)[Delete]

Delete detection settings selected from the [Detection

Setting List].

(16)[Detection Setting Number], [Detection Type]

The detection setting numbers and detection types

selected from the [Detection Setting List] are shown.

(17)[Enable these detection settings] checkbox

Select this checkbox to enable the detection settings

that are selected in the [Detection Setting List].

(18)[Detection Criteria] tab, [Event] tab

Switch between the Detection Criteria and Event tabs.

• [Detection Criteria]

Specify detection settings name, detection area/line,

and detection criteria (p. 103).

• [Event]

Specify operations to be performed when events

occur (p. 104).

(19)[Restore settings]

Clear the settings you have specified on the screen of

the tool and restore the settings saved in the camera.

(20)[Save settings]

Save the edited detection settings in the camera.

After the detection settings have been specified, be

sure to save the settings in the camera by clicking

[Save settings].

Flow of Intelligent Function Setting

The intelligent functions are set according to the

procedure below. For details on the setting method, see

each setting page.

„ Camera Position Settings

For details on the preset setting method, see “Preset

Setting Tool” (p. 90).

This selects [Lock camera position] in the Intelligent

Function Setting Tool.

If [No] is clicked, select [Lock camera position].

Important

It takes tens of seconds for the intelligent function to restart. No

detection is performed while restarting.

Important

Presets that were set with the Preset Setting

Tool cannot be used for the settings of intelligent functions.

1

Register the camera angle as a preset using the
Preset Setting Tool.

Important

It is strongly recommended that you preset the camera angle in
advance and lock the camera at a preset position with the

Intelligent Function Setting Tool. An angle of view that captures

the target object up close is also recommended.

2

Launch the Intelligent Function Setting Tool.

3

Click [Yes].

4

Select a preset.

Advertising
This manual is related to the following products: