Canon VB-S800D - Manual (Page 150)

150
A470 Uploader initialization failed [crit]
„ Application (Audio Server) Messages
B001 Starting and shutdown of audio server [info]
B011 Audio client connected [info]
B012 Audio client closed [info]
B102 Client connection denied [notice]
B103 Client forcibly disconnected [notice]
B402 Audio server initialization failed [err]
B403 Settings change failed [err]
„ Application (Video-Related) Messages
V001 Starting and shutdown of video server [info]
V020 Starting intelligent service [info]
V021 Shutting down intelligence service [info]
Description uploader initialization failure - %1 (A470)
%1 Error number
Meaning The uploader could not be initialized.
Countermeasure If the problem persists after rebooting the
camera, the camera is faulty, arrange for
servicing.
Description %1 audio. (B001)
%1 starting | stopping
Meaning The audio server was started/shut down.
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
Description [%1] %2 closed n= %3 (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was disconnected.
Description %1 request denied [%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning Client connection was denied due to an
authentication error (41), time specification
error (42), insufficient resource (43),
specification of unsupported codec (45),
specification of unpermitted user level (47),
too many clients (49) or invalid operation
mode (4a).
Countermeasure 41: Check user name, password or user list
used when connecting. 42: Check playtime
or maximum connection time settings used
when connecting. 43: Reconnect or restart.
45: Use supported client software. 47:
Check user level used when connecting. 49:
Check client number settings. 4a: Check if
usage of audio server is enabled.
Description %1 access denied [%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 42 | 4a)
Meaning Connection was initially permitted, but the setting
has subsequently been changed to prohibit
access, thereby triggering a forced disconnection
(the denial type is the same with B102).
Description wvaudio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized.
The audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The
audio server stops.
Countermeasure If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.
Description %1 video (V001)
%1 Starting or stopping
Meaning The video server was started/stopped.
Description starting intelligent. (V020)
Meaning Intelligent service was started.
Description shutdown intelligent. (V021)
Meaning Intelligent service was shut down.