Intelligent function settings – Canon VB-S800D User Manual

Page 102

Advertising
background image

102

„ Intelligent Function Settings

When you click [Add] in the [Detection Setting List],

the [New Detection Settings] dialog box is displayed.

Set the [Detection Setting Number] and [Detection

Type] of the detection setting you want to add, and

then click [OK].

Up to 15 different detection settings can be

registered.

(1) [Detection Setting Number]

Specify a detection setting number from 1 to 15 for the

detection area you want to set.

(2) [Detection Type]

Select detection types that suit your purpose from

[Moving Object Detection], [Abandoned Object

Detection], [Removed Object Detection], [Camera

Tampering Detection], or [Passing Detection]. For

details on detection types, see p. 97.

To enable detection settings, select [Enable these

detection settings].

Clear this checkbox to disable a setting.

Set detection criteria while operating the camera and

checking the video in the video display area.

Click [Save settings] to save the settings in the

camera.

You can check the detection status of the specified

detection settings in the event display panel (p. 139).

1

Add detection settings.

2

Enable Detection Settings.

3

Set detection criteria ([Detection Criteria] tab p. 103).

4

Set operations to be performed when a change in a
subject is detected ([Event] tab p. 104).

5

Save the detection settings in the camera.

6

Check the detection result.

(1)

(2)

Important

Notes on intelligent function settings and operation

• When setting intelligent function, do an actual detection test

to confirm that detection will be performed correctly.

• When the entire screen is exposed to sudden changes in

brightness, detection may not be performed as intended for

up to 5 minutes.

• If [Auto] is used in [Day/Night] settings or automatic

switching between [Day Mode] and [Night Mode] is
performed when a timer is used, [Restarting intelligent

function. Please wait.] is shown and intelligent function will

restart. Detection will not be performed while intelligent
function is restarting.

• If the camera is operated during intelligent function setting or

operation, [Restarting intelligent function. Please wait.] is

shown and intelligent function will restart. Detection will not

be performed while intelligent function is restarting.

• If [Video] > [Video Size Set] on the Setting page is changed,

be sure to change the preset position setting (VB-S30D/VB-
S31D only) and intelligent function settings, and check the

operation. The intelligent function may not operate,

depending on the settings.

• Set intelligent function again if the angle of view is changed

through camera operation, or the camera position of a preset

or home position is changed using Preset Setting Tool.

• If an [Enable] detection setting exists under [Status] in the

[Detection Setting List] while the camera position is locked,

control privileges cannot be obtained by VB Viewer or RM.
Also, the custom settings automatic control will no longer run.

Difficult-to-detect Subjects

• Objects or portions where there is little contrast in color or

brightness with the background may not be detected.

• Small objects and changes on the screen may not be

detected.

• Partial or entire changes in light on the screen may trigger

detection.

• If multiple objects overlap, the detection status may change.

In particular, passing may not be detected or may be
detected at the wrong timing.

Advertising
This manual is related to the following products: