Canon VB-S800D User Manual

Page 45

Advertising
background image

[Camera] Setting Initial Camera Settings and External Device Name

45

4

S

et

ting P

age

Select [30] or [60] if brightness changes frequently,

such as when a light source passes in front of the

camera. Select [5] or [10] if change in brightness is

minimal.

Installation Conditions

(1) [LED Setting]

Select [Turn Off] or [Turn On] for the LED operation

status on the camera. Set to [Turn Off] if you do not

want to turn on the LED.

(2) [Image Flip]

Select [Disable] or [Enable] for the orientation of the

camera video.

Note

The LED will light for several seconds when booting even if the

[LED Setting] is set to [Turn Off].

Camera Position Control

(1) [Restricted to Presets]

Set the camera control preset to [No Restriction] or

[Preset Only]. The administrator can limit camera

control by non-administrators to preset angles by

selecting [Preset Only].

(2) [Camera Position without Control]

Select either [Do not return to Home Position] or

[Return to Home Position] as the action when no

control privileges are requested by users and the

home position has already been set.

When [Return to Home Position] is selected and no

users have control privileges, the camera moves

automatically to the home position. This function

requires the home position of the camera be set in

advance. Set the home position using Preset Setting

Tool (p. 90).

External Input Device / External Output Device

[Device Name] for external input device/external output
device

Be sure to enter each device name in order to identify

the corresponding external device being connected.

Enter [Device Name (alphanumeric characters)] using

up to 15 characters (ASCII characters (space or

printable characters) excluding the double quotation

mark (“)).

Note

The external device name set here will be shown when the Admin
Viewer or included RM-Lite is used.

Advertising
This manual is related to the following products: