Canon VB-S800D User Manual

Page 52

Advertising
background image

52

– From the Intelligent Function Setting Tool [Event] tab >

disable [ON Event Operation], [OFF Event Operation] or
[Detected mode Operation] (p. 104).

– If [External Device Input Event] is enabled, disable [Active

Event Operation], [Inactive Event Operation], or [Ongoing
Active Event Operation] (p. 57).

– If [Timer Event] is enabled, increase the value in [Repeat

Interval] (p. 58).

HTTP Upload

The HTTP upload function sends notifications via HTTP or

via HTTP with attached videos, depending on the network

camera event.

(1) [Notification]

Select [Notification Only with HTTP] or [Video

attached Notification with HTTP] as the content of

notification.

(2) [URI]

Enter the URI to be uploaded to (using up to 255

characters).

(3) [User Name], [Password]

Enter the user name and password required for

authentication.

Digest authentication is not supported.

(4) [Proxy Server]

Enter the host name or IP address of the proxy server

(using up to 63 characters).

(5) [Proxy Port]

Enter the port number of the proxy server (factory

default setting is [80]).

(6) [Proxy User Name], [Proxy Password]

Enter the user name and password of the proxy

server.

Digest authentication is not supported.

(7) [Parameter (query string)]

Enter the parameter (using up to 127 characters).

Parameters can be specified using the “%” character

(p. 144).

(8) [HTTP Upload Test]

Clicking [Exec] initiates an upload test based on the

settings currently entered. Only one JPEG image is

uploaded. It is not necessary to click [Apply].

After entering a password, first click [Exec], then

[Apply] the password.

FTP Upload

(1) [Notification]

The content of notification is set to [Video data upload

with FTP].

(2) [FTP Server]

Enter the host name or IP address of the FTP server

(using up to 63 characters).

(3) [User Name], [Password]

Enter the user name and password required for

authentication.

(4) [PASV Mode]

Select [Disable] or [Enable] for the PASV mode when

uploading via FTP.

(5) [File Upload Path]

Enter the path to the folder where the video file is to be

uploaded to (using up to 255 characters).

(6) [File Naming]

Set a desired file naming rule.

[YYYYMMDDHHMMSSms]

Video is uploaded according to the file name format

of
“{year}{month}{day}{hour}{minute}{second}{ms}.jpg”.

(Example: 20130123112122000.jpg)

[YYYYMMDD Directory/HHMMSSms]

A subdirectory named “{year}{month}{day}” is

created first, and then the video is uploaded using

the file name “{hour}{minute}{second}{ms}.jpg”.

(Example: 20130123/112122000.jpg)

[Loop]

Video is loaded with a file name numbered up to the

value set in [Maximum Number of Loops].

(Example: 0000.jpg, 0001.jpg)

[Maximum Number of Loops]

If [Loop] is set under [File Naming], enter the

maximum number of loops in the range of 0 to 9999.

Important

• Enter [Proxy Server], [Proxy Port], [Proxy User Name] and

[Proxy Password] if connecting via a proxy.

• For information about the HTTP upload function and settings,

contact your nearest Canon Customer Service Center.

Advertising
This manual is related to the following products: