Memory card access, See “directory structure for data, Downloaded with recorded video utility” (p. 142) – Canon VB-S800D User Manual

Page 142

Advertising
background image

142

You can set the camera so that the following data is saved automatically to the camera’s memory card. (“Chapter 4 Setting

Page”, “[Memory Card] Memory Card Operations and Settings” (p. 69)).

When either the storage capacity of the memory card or the number of files that can be saved is reached, you cannot save

further video to the memory card. If this happens, delete any unneeded video files with the Recorded Video Utility.

• Video files when recording-mode stream transmission failed to be sent due to network errors (JPEG only)

• Video files when HTTP or FTP upload failed (JPEG/H.264(1))

• Video files manually recorded by the user from the Admin Viewer (JPEG/H.264)

• Video files recorded by [External Device Input], [Volume Detection], and the intelligent functions when an event occurs

(JPEG/H.264(1))

• Video files recorded using a timer (JPEG/H.264(1))

• Log

„ Access to the Memory Card

Use the Recorded Video Utility (p. 112) of the Admin Tools or FTP software (not included) to access the camera using the

camera’s IP address.

FTP Software Settings

Address:

Camera IP address

(factory default setting: 192.168.100.1)

User ID:

Administrator user ID

(factory default setting: root)

Password:

Administrator password

(factory default setting: camera)

„ Directory Structure for Data Downloaded with Recorded Video Utility

When video on a memory card is downloaded to a computer with the Recorded Video Utility, folders are created

automatically in accordance with conditions such as the camera and the date and time.

The following shows the folder structure.

Example: H.264 video, manually recorded using a camera with an IP address of 192.168.100.1, on Sept. 10, 2013, from

16:00:00 to 16:59:59 (Camera Time Zone: GMT+09:00).

(1) Folder specified with [Download to]

(2) IP address of the camera

(3) Video recording date

(4) Recording start and end times (UTC)

(5) Time difference from UTC

(6) Recording type

E: Event

M: Manual recording

R: Recording-mode stream

T: Timer

U: Upload

(7) Video format (JPEG or H.264)

Note

• A folder is created once per hour.

• If the time difference is added to the starting and ending times, it will equal the local time.

Memory Card Access

Important

• When deleting a video using a method other than the Recorded Video Utility, you must perform [Recreate Video Management

Information] under [Memory Card] in the setting page (p. 70).

• Canon will assume no liability for any accident or damage resulting from use of FTP software.

D:\work \ 192.168.100.1 \ 20130910 \ 070000_075959 _ +9 _ M _ H264

(1)

(2)

(3)

(4)

(5)

(6)

(7)

Advertising
This manual is related to the following products: