P. 54) – Canon VB-S800D User Manual

Page 54

Advertising
background image

54

Video Server

(1) [Maximum Number of Clients]

Set the maximum number of clients that can be

connected to the camera at the same time. Up to 30

clients can be set.

If 0 is set, connection is prohibited except for the

Administrator.

(2) [Camera Control Queue Length]

Set the maximum queue length for clients requesting

camera control privilege from the viewer. The

maximum number is 30. Enter an integer from 0 to 30.

If 0 is set, camera control is prohibited except for the

Administrator.

(3) [Maximum Connection Time (sec.)]

Set the time in seconds during which an individual

client can connect to the camera. The maximum

number is 65535. Enter an integer from 0 to 65535. If 0

is set, the connection time becomes unlimited.

(4) [Camera Control Time (sec.)]

Set the maximum time during which the viewer can

control the camera. The maximum number is 3600.

Enter an integer from 1 to 3600.

Audio Server

(1) [Audio Transmission from the Camera]

When [Enable] is selected, the audio input through the

microphone attached to the camera can be

transmitted to the Viewer.

(2) [Input Volume]

Set the volume of input for the microphone connected

to the camera in the range of 1 to 100. The greater the

value, the larger the input volume becomes.

(3) [Voice Activity Detection]

If [Enable] is selected, the audio transmission is

stopped temporarily when no audio is output. This

way, the load of the applicable network can be

reduced.

(4) [Audio Input]

Set the microphone input. Select [Line In],

[Microphone In (dynamic microphone)] or

[Microphone In (condenser microphone)].

[Server]
Setting the Video Server, Audio Server and HTTP Server

The following can be set here.

• Video Server

Set the video transmission from the camera.

• Audio Server

Set the audio transmission from the camera.

• HTTP Server

Set the authentication method, and HTTP port

number.

Caution

Switch line in and microphone in on each setting page
according to the specification of the microphone.
Using the wrong input may damage the camera and/or
microphone. Be sure to configure settings correctly.

Important

• Video and audio can be distributed to up to 30 clients.

However, when there are many clients or they are connected

to the camera over an SSL connection, the video frame rate
may slow down and the sound may drop out if audio

reception from the camera is enabled.

• The volume, sound quality, etc., may change depending on

the characteristics of the microphone used.

• If the [Input Volume] settings are changed after setting volume

detection, check the detection setting again.

• The video and audio may not be synchronized.

• The audio may be temporarily interrupted, depending on the

performance of the computer and the network environment.

• The audio may be interrupted if anti-virus software is

enabled.

• Communication may be temporarily interrupted, cutting off

the audio, if the LAN cable is unplugged and plugged in

again. If this occurs, reconnect from the Viewer.

• Audio Transmission
• Input Volume
• Voice Activity Detection

Advertising
This manual is related to the following products: