Display screens of view restriction setting tool – Canon VB-S800D User Manual

Page 87

Advertising
background image

View Restriction Setting Tool

87

5

Adm

in T
ools

Display Screens of View Restriction Setting Tool

(1) Video Display Area

The video currently captured by the camera is shown.

Pan, tilt, and zoom operations are the same as in the

Admin Viewer. For details, see “How to Operate the

Viewer” (p. 124).

(2) [Switch Mouse Operation] button

Click the button to switch to

. In this mode, move

the mouse pointer to the video display area and click

to operate the pan and tilt. Click the button again to

return to

.

(3) [Switch Screen Size] button

Each time this button is clicked, the screen size of the

video display area switches between “480 x 270” and

“960 x 540”.

(4) [Obtain/Release Camera Control] button

This button is used to obtain/release the camera

control privileges. For details, see “Obtaining Camera

Control Privileges” (p. 126).

(5) [Control for Admin] button

Displays the Control for Admin Panel (p. 117).

(6) [Panorama Screen]

The panorama image registered in the camera is

shown. View restriction preview frames, representing

the view restriction setting values, are also shown. You

can drag the frames to change their shapes, with the

new settings being reflected in View Restriction

Settings.

• View restriction preview frame

(6)-1 Pan/tilt preview frame (red frame)

Range of field of view defined by

top/ bottom/left/right edges

(6)-2 Wide-angle preview frame (green frame)

Wide-angle restriction setting (restriction of

capture frame)

(6)-3 Telephoto preview frame (yellow frame)

Telephoto restriction setting (restriction of

maximum zoom ratio)

(7) [Digital Zoom]

The current digital zoom usage status of the camera is

shown in real time.

(8) [Apply the view restriction]

To use view restrictions, select this checkbox.

(9) View restriction setting entry boxes and [Get value]

You can enter a value in each view restriction setting

entry box to change the applicable setting. You can

load the values for the current camera angle to the

view restriction settings by clicking [Get value].

• View restriction settings

[Upper Limit]: Top limit of the view restriction. Click

[Get value] to load the top edge

value of the current camera angle.

[Lower Limit]: Bottom limit of the view restriction.

Click [Get value] to load the bottom

edge value of the current camera

angle.

[Left Limit]:

Left limit of the view restriction. Click

[Get value] to load the left edge value

of the current camera angle.

[Right Limit]:

Right limit of the view restriction.

Click [Get value] to load the right

edge value of the current camera

angle.

[Telephoto]:

Telephoto limit of the view restriction.

Click [Get value] to load the zoom

ratio of the current camera angle.

[Wide-angle]: Wide-angle limit of the view restriction.

Click [Get value] to load the zoom

ratio of the current camera angle.

(1)

(4)

(5)

(11)

(12)

(10)

(3)

(2)

(6)
(6)-1
(6)-2

(6)-3
(7)

(8)

(9)

Advertising
This manual is related to the following products: