Canon PowerShot G1 X Mark II - Manual (Page 144)

144
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
10 Check the confirmation
numbers and complete the
setup process.
z z Make sure the confirmation number on
the camera matches the number on the
smartphone or computer.
z z
Press the <
q><r> buttons or turn the
<
7> dial to choose [OK], and then press
the <
m> button.
z z
Complete the setup process on the
smartphone or computer.
z z
[ ] (
=
163 ) and CANON iMAGE
GATEWAY are now added as
destinations, and the [
] icon changes
to [ ].
z z A message is displayed on the
smartphone or computer to indicate that
this process is finished. To add other
Web services, follow the procedure in
“Registering Other Web Services” from
step 2 (
=
144 ).
•
You can connect to WPS-compatible access points by choosing [WPS
Connection] in step 6. For details, see steps 5 – 7 in “Connecting to WPS-
Compatible Access Points” (
=
151 ).
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera first ( =
142 ).
1
Access the Web service
settings screen.
z z
Follow step 1 in “Registering CANON
iMAGE GATEWAY” (
=
142 ) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2 Configure the Web service you
want to use.
z z Follow the instructions displayed on the
smartphone or computer to set up the
Web service.
3
Choose [ ].
z z
Access the Wi-Fi menu (
=
148 ), choose
[ ] (either press the <
o><p><q><r>
buttons or turn the <
7> dial), and then
press the <
m> button.
z z
The Web service settings are now
updated.
• If any configured settings change, follow these steps again to update the
camera settings.