Digest movie playback, Still images/movies, Still images – Canon PowerShot G1 X Mark II User Manual

Page 34

Advertising
background image

34

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, M, C1, and
C2 Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

Digest movie quality is [

] and cannot be changed.

Sounds are not played when you press the shutter button halfway or trigger
the self-timer (

=

170

).

Digest movies are saved as separate movie files in the following cases even if
they were recorded on the same day in [

] mode.

-

The digest movie file size reaches approximately 4 GB, or the total recording
time reaches approximately 13 minutes and 20 seconds.

-

The digest movie is protected (

=

123

).

-

Daylight saving time (

=

15

) or time zone (

=

171

) settings are changed.

-

A new folder is created (

=

175

).

Recorded shutter sounds cannot be modified or erased.

If you prefer to record digest movies without still images, adjust the setting
in advance. Choose MENU (

=

26

) > [

4] tab > [Digest Type] > [No Stills]

(

=

26

).

Individual chapters can be edited (

=

138

).

Digest Movie Playback

Display a still image shot in [

] mode to play a digest movie, or specify the

date of the digest movie to play (

=

115

).

Still Images/Movies

If the camera is turned on while the <

l> button is held down,

the camera will no longer sound. To activate sounds again, press
the <

n> button and choose [Mute] on the [3] tab, and then

press the <

q><r> buttons to choose [Off].

Still Images

A blinking [

] icon warns that images are more likely to be blurred

by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.

If your shots are dark despite the flash firing, move closer to the

subject. For details on the flash range, see “Flash Range” (

=

230

).

The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see “Shooting Range” (

=

231

).

To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.

A blinking [

h] icon displayed when you attempt to shoot indicates

that shooting is not possible until the flash has finished recharging.

Shooting can resume as soon as the flash is ready, so either press
the shutter button all the way down and wait, or release it and press
it again.

The shutter sound will not be played when the Sleeping and Babies
(Sleeping) icons (

=

35

) are displayed.

Although you can shoot again before the shooting screen is
displayed, your previous shot may determine the focus, brightness,
and colors used.

You can change how long images are displayed after shots (

=

55

).

Advertising