Canon PowerShot G1 X Mark II - Manual (Page 158)

158
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending Images
Send images wirelessly to destinations registered on the camera as follows.
Note that when images are sent to a computer, the computer is used
instead of the camera (
= 160 ).
Sending Images Individually
1
Choose an image.
z z
Turn the <
7> dial to choose an image
to send.
2
Send the image.
z z Press the < q><r> buttons to choose
[Send this image], and then press the
<
m> button.
z z
When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the <
m> button.
z z
Image transfer will begin. The screen
darkens during image transfer.
z z
After images are uploaded to a Web
service, [OK] is displayed. Press the
<
m> button to return to the playback
screen.
z z
After sending images to a camera or
smartphone, [Transfer completed] will be
displayed, and the display will return to
the image transfer screen.
z z
When the target camera has been added
successfully, the image transfer screen
will be displayed. Proceed to “Sending
Images” (
=
158 ).
• To add multiple cameras, repeat this procedure from the first step.
•
Once a camera is added, the camera name will be displayed on the screen in
step 3. To connect to a camera again, simply choose the camera name from
the list.
• Once you have assigned a connection destination to Touch Actions ( = 131 ),
you can prepare the camera to reconnect to the destination simply by dragging
across the screen with the assigned gesture.