Canon PowerShot G1 X Mark II - Manual (Page 154)

154
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Connecting to Access Points in the List
1
View the listed access points.
z z
View the listed networks (access
points) as described in steps 1 – 4 of
“Connecting to WPS-Compatible Access
Points” (
=
150 – 151 ).
2
Choose an access point.
z z
Press the <
o><p> buttons or turn the
<
7> dial to choose a network (access
point), and then press the <
m> button.
3
Enter the access point
password.
z z Press the <
m> button to access the
keyboard, and then enter the password
(
=
150 ).
z z
Press the <
o><p> buttons or turn the
<
7> dial to choose [Next], and then
press the <
m> button.
4
Choose [Auto].
z z Press the <
o><p> buttons or turn the
<
7> dial to choose [Auto], and then
press the <
m> button.
z z
If you selected [ ], [
2], or [ ] as the
target device, see “Connecting to WPS-
Compatible Access Points”, starting with
step 9 (
=
152 ).
z z
If you selected a Web service as the
destination, see “Connecting to WPS-
Compatible Access Points”, starting with
step 12 (
=
153 ).
• To determine the access point password, check on the access point itself or
refer to the user manual.
•
Up to 16 access points will be displayed. If no access points are detected,
choose [Manual Settings] in step 2 to manually set an access point. Follow on-
screen instructions and enter an SSID, security settings, and a password.
• When you use an access point that you have already connected to for
connecting to another device, [*] is displayed for the password in step 3. To
use the same password, choose [Next] (either press the <
o><p> buttons or
turn the < 7> dial) and press the <m> button.