Digital tele-converter, Changing the af frame mode, Af frame mode – Canon PowerShot G1 X Mark II User Manual

Page 90: Is [1-point

Advertising
background image

90

Before Use

Basic Guide

Advanced Guide

Camera Basics

Auto Mode / Hybrid
Auto Mode

Other Shooting
Modes

P Mode

Tv, Av, M, C1, and
C2 Mode

Playback Mode

Wi-Fi Functions

Setting Menu

Accessories

Appendix

Index

To access the screen in step 2, you can either touch [

] on the screen in

step 1 or touch [

] on the manual focus screen (

=

87

).

You can also configure this setting by touching or dragging the bar on the
screen in step 2 to specify a value and then touching [

].

Still Images

Movies

Digital Tele-Converter

The focal length of the lens can be increased by approximately 1.6x or 2.0x.
This can reduce camera shake because the shutter speed is faster than it
would be if you zoomed (including using digital zoom) in to the same zoom
factor.

z

z

Press the <

n> button, choose

[Digital Zoom] on the [

4] tab, and then

choose the desired option (

=

26

).

z

z

The view is enlarged and the zoom factor
is displayed on the screen.

The digital tele-converter cannot be used with digital zoom
(

=

38

) or AF-point zoom (

=

53

).

The shutter speed may be equivalent when you move the zoom lever all the
way toward <

i> for maximum telephoto, and when you zoom in to enlarge

the subject to the same size following step 2 in “Zooming In Closer on Subjects
(Digital Zoom)” (

=

38

).

Still Images

Movies

Changing the AF Frame Mode

Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.

z

z

Press the <

n> button, choose [AF

Frame] on the [

4] tab, and then choose

the desired option (

=

26

).

Still Images

Movies

1-point

One AF frame is displayed. Effective for reliable focusing. You can also
move the frame by touching the screen (

=

91

).

A yellow AF frame is displayed with [

] if the camera cannot focus

when you press the shutter button halfway.

To compose shots so that subjects are positioned at the edge or in a corner,
first aim the camera to capture the subject in an AF frame, and then hold
the shutter button halfway down. As you continue to hold the shutter button
halfway, recompose the shot as desired, and then press the shutter button all
the way down (Focus Lock).

The AF frame position is enlarged when you press the shutter button halfway
and [AF-Point Zoom] (

=

53

) is set to [On].

Advertising